Leds - Bosch VIDEOJET X40 Installation & Operating Manual

114 en | Appendix
8.4

LEDs

The VideoJet X40 network video server has a number of LEDs on its front and rear panels that
show the operating status and can give indications of possible malfunctions:
8.4.1 Power On LED
Does not light up:
Lights up green:
8.4.2 SFP LED
Does not light up:
Lights up yellow:
Flashes yellow:
8.4.3 ETH 1 LED
Does not light up:
Lights up yellow:
Flashes yellow:
8.4.4 ETH 2 LED
Does not light up:
Lights up yellow:
Flashes yellow:
8.4.5 Connect LED
Lights up red:
Lights up green:
Flashes green:
Flashes red:
8.4.6 HDD LED
Does not light up:
Lights up orange:
Flashes orange:
V3.5 | 2007.12
VideoJet X40 is switched off.
VideoJet X40 is switched on.
No connection.
Connection established.
Data being transmitted.
No network connection.
Network connection established.
Data being transmitted over the network.
No network connection.
Network connection established.
Data being transmitted over the network.
Startup in progress.
Startup complete, VideoJet X40 is operational.
Video connection established.
VideoJet X40 is faulty, for example following failed firmware
upload.
No hard drive fitted.
Hard drive fitted.
Hard drive activity.
Installation and Operating Manual
VideoJet X40
Bosch Security Systems