Table of Contents
Advertisement
VideoJet X10 SN
8.4
LEDs
The VideoJet X10 SN network video server has a number of LEDs on its front and rear panels
that show the operating status and can give indications of possible malfunctions:
ETH LED
Does not light up:
Lights up yellow:
Flashes yellow:
Connect LED
Lights up red:
Lights up green:
Flashes green:
Flashes red:
CF LED
Flashes orange:
Bosch Security Systems
No network connection.
Network connection established.
Data being transmitted over the network.
Startup in progress.
Startup complete, VideoJet X10 SN is operational.
Video connection established.
VideoJet X10 SN is faulty, for example following failed
firmware upload.
Activity on CF card.
Installation and Operating Manual
Appendix | en 107
DOC | V4.0 | 2009.06
Advertisement
Table of Contents
