Bosch VIDEOJET X40 Installation & Operating Manual page 33

VideoJet X40
5.5.3 Alarm mode stamping
Select On to display a text message overlay in the event of an alarm. It can be displayed at a
position of your choice that you can then specify using the Custom option. Or it can be set to
Off for no overlay information.
1.
2.
3.
5.5.4 Alarm message
Enter the message to be displayed in the event of an alarm. The maximum text length is 31
characters.
5.5.5 Video watermarking
Choose On if you wish the transmitted video images to be "watermarked". After activation, all
images are marked with a green W. A red W indicates that the sequence (live or saved) has
been manipulated.
Bosch Security Systems
Select the desired option from the list.
If you select the Custom option, additional fields are displayed where you can specify the
exact position (Position (XY)).
In the Position (XY) fields, enter the values for the desired position.
Installation and Operating Manual
Configuration Using a Web Browser | en 33
V3.5 | 2007.12