114 en | Appendix
8.4
LEDs
The VideoJet X20 SN network video server has a number of LEDs on its front and rear panels
that show the operating status and can give indications of possible malfunctions:
8.4.1
ETH LED
Does not light up:
Lights up yellow:
Flashes yellow:
8.4.2
Connect LED
Lights up red:
Lights up green:
Flashes green:
Flashes red:
8.4.3
CF LED
Flashes orange:
V3.5 | 2007.12
No network connection.
Network connection established.
Data being transmitted over the network.
Startup in progress.
Startup complete, VideoJet X20 SN is operational.
Video connection established.
VideoJet X20 SN is faulty, for example following failed
firmware upload.
CF card activity.
Installation and Operating Manual
VideoJet X20 SN
Bosch Security Systems