Things To Know -Leds On The E2712 Controller-Drive Tray - Bosch DSA-N2E7X2-08AT Installation Manual

56 en | Turning on the power and checking for problems in an E2700 controller-drive tray configuration
12.2 Things to know –LEDs on the E2712 controller-drive tray
The following topics provide information about the LEDs found on the E2712 controller-drive
tray.
LEDs on the left end cap
Location LED
1 Controller-drive
tray locate
2 Service action
required
3 Controller-drive
tray over-
temperature
4 Power
5 Standby power
LEDs on the drive
Location
2016.12 | V2.1 | DOC
Color
White Identifies a controller-drive tray that
you are trying to find.
Amber A component within controller-drive
tray needs attention.
Amber The temperature of the controller-drive
tray has reached an unsafe level.
Green Power is present.
Green The controller-drive tray is in Standby
Power mode.
LED Color
On
89011-02
On
Installation manual
DSA E-Series (E2700)
On
Normal status.
Normal status.
Normal status.
Power is not present.
The controller-drive tray is
not in Standby Power
mode.
Blinking Off
Bosch Sicherheitssysteme GmbH