Bosch VIDEOJET X40 Installation & Operating Manual page 50

50 en | Configuration Using a Web Browser
5.17.9 Decoupling the Drive in Use
Each drive can only be associated with one user. If a drive is already being used by another
user, you can decouple the user and connect the drive with the VideoJet X40.
CAUTION!
!
Before decoupling, make absolutely sure that the previous user no longer needs the drive.
1.
2.
5.17.10 Storage Information
The status of the currently selected storage medium and the data throughput are displayed
here for information. You cannot change any of these settings.
1.
2.
3.
V3.5 | 2007.12
Double-click a drive that is already being used in the LUN map. You will see a warning
message.
Confirm the decoupling of the current user. The drive is released and can now be
connected to the VideoJet X40.
Click Log to view a status report with logged actions. A new window will open.
In this window, click Clear to delete all entries. The entries will be deleted immediately.
This action cannot be reversed.
Click the Close button to close the window.
Installation and Operating Manual
VideoJet X40
Bosch Security Systems