Label advances 1-2 inches before a fault indication
•
The ribbon is installed incorrectly. Make sure that the dull
side (side with ink) is facing the paper.
•
A bad ribbon/paper combination is resulting in an
insufficient amount of friction between paper and ribbon.
Ensure that the correct type of ribbon is being used.
Label advances 16 inches before a fault indication
•
The media is not loaded properly, see Chapter 5. When
loading media be certain that the media hub and media guide
is against the media and that gaps or marks in the labels are
in line with the media sensor.
•
If equipped, the Adjustable Media Sensor may need to be
repositioned (see Chapter 3).
•
The media sensor or media sensor circuitry may be
defective, call for service.
Tracking Problems
•
The media is not loaded properly, see Chapter 5. When
loading media be certain that both the media hub and media
guide rest against the media.
•
The media width adjustment is not set properly, (see Chapter
5).
52
BP-1244/BP-1344