Brady BP-1244 Operator's Manual page 35

17) INTERNAL MODULE
Sets the number of 4K Byte blocks
allocated for the internal RAM
module.
Possible Values:
0 – 255; default = *128
19) ALIGNMENT LENGTH
Section 4.5 for more information)
Leading edge to leading edge
distance of two successive labels.
Must be set when 'LABEL
ALIGNMENT' is set to Yes.
Possible Values:
0 – 999; default =100*
Units: .01 inch
* = Default Setting
All of the menu items listed in the previous tables are stored in non-volatile memory.
BP-1244/BP-1344
18) LABEL ALIGNMENT
4.5 for more information)
Sets Label Alignment Method.
Possible Values:
YES
AUTO (printer will automatically
* NO
20) STOP LOCATION
(see
Sets convenient stop locations for
different printer configurations.
Possible Values:
*HOST (printer uses host values of SOP and
Present Distance)
PEEL (sets stop location just behind the
peel bar)
CUT (sets stop location at the cutter
blade)
COVER (sets stop location at the tear plate)
NONE (printer uses normal start location and
ignores host commands)
(printer uses 'ALIGNMENT
LENGTH' or host sent value)
determine label length)
(Label Alignment disabled)
(see Section
25