Label Alignment Recommended Settings - Brady BP-1244 Operator's Manual

4.5.4 Label Alignment Recommended Settings

Label Alignment is intended for use with label length less than the
distance between the printhead and the edge sensor, or where label
wastage at power-up is a concern. Label Alignment is not recommended
for label stock lengths greater than 6.5" or for label stock containing 2 or
more form lengths.
Label Stock
Continuous
6.5" or less
6.5" or more
Multiple form length
30
Label Alignment Setting
NO
YES or AUTO
NO
NO
BP-1244/BP-1344