Flash Memory Expansion - Brady BP-1244 Operator's Manual

3.5 Flash Memory Expansion

The printer can be equipped with an optional Flash Memory Expansion.
This flash expansion can be used for storage of label formats and fonts.
For font downloading instructions, refer to Section 5.8.
To install the Flash Memory Expansion:
1. Turn the power off and
unplug the printer.
Remove any installed
media from the printer.
2. Using a coin, flathead
screwdriver, or similar
object, insert it into the
Slot on the underside of
the printer and gently pry
the Expansion Cover from
the printer.
3. Position the Flash Memory
Expansion Assembly
oriented with its connector
facing down, as shown,
and gently insert it into the
Expansion Bay until the
assembly is firmly seated.
Note: When using a blank expansion module for the first time, the printer
will automatically format it upon power-up; this initial format can take
up to one minute to perform.
BP-1244/BP-1344 17