Loading Ribbon - Brady BP-1244 Operator's Manual

3.4 Loading Ribbon (Thermal Transfer)
1. Open the cover.
2. Remove both
ribbon hubs.
3. Slide a roll of
Ribbon onto one
of the Ribbon
Hubs and an
Empty Core onto
the other hub.
4. Push the
Printhead Latch
down and raise
the Printhead
Carrier
Assembly.
5. Slide the Media
Type Switch into
the 'Transfer'
position.
BP-1244/BP-1344
Slide a Ribbon onto a Hub and
an Empty Core onto a Hub
Empty Core
Media Type Switch
Push in and lift
to remove the Hubs
Ribbon
Direct
Transfer
15