Brady BP-1244 Operator's Manual page 21

Position the Adjustable Media Sensor as follows:
1. Based on the measurement that you made earlier, choose the
Reference Letter that best corresponds to the location of your TOF
mark.
2. Use a finger to move the Bottom Slide until your selected Reference
Letter appears in the Setting Window of the slide.
3. Use a finger to move the Top Slide until your selected Reference
Letter appears in the Setting Window of the slide.
Note: The Top and Bottom Slides must be positioned over the same
Reference Letter for proper media sensor function.
4. Proceed to 'Loading Media' (Section 3.3).
BP-1244/BP-1344
Top Slide
Bottom Slide
Reference Letters
Setting Window
Setting Window
Reference Letters
11