1-3-Environment; 1-4-Technical Data - Brady BP-PR PLUS Series Operator's Manual

1-3 Environment
Obsolete devices contain valuable recyclable materials that should be sent for
recycling.
•
The modular construction of the printer enables it to be easily disassembled into
its component parts.
•
•
1-4 Technical Data
Note: The minimum cut length depends on the media, in particular its adhesive
characteristics. Perform preliminary tests. Also test the media, if the media is very
hard, very flexible or very thin.
The cutters have a durability of more than 500,000 cuts. Depending on the type of
the cut material the blades could wear earlier and have to be replaced. Used
blades are not designed regrinding.
An optional Cutter Tray is available:
A C O ' M
UTO UTTER PERATOR S
Send to suitable collection points, separately from residual waste.
Send the parts for recycling.
Take the electronic circuit boards to public waste disposal centers or to the
distributor.
Standard Cutter
Cutter with peripheral interface *
For printer type
Material width up to (in/mm)
Min. cut length (in/mm)
Material thickness (g/m²)
Power supply
* Interface for trigger switch or external control
Cutter Tray 4
For printer type
Material width (in/mm)
Length of the cut pieces (in/mm)
Stack height (in/mm)
ANUAL
Catalog Number:
PR+-AutoCutter-FI
Catalog Number:
PR+-PerfCutter-FI
PR-300 PLUS
PR-600 PLUS
4.7 / 120
0.08 / 2
up to 500
peripheral connector of the printer
Catalog Number: PR+-CutterTray
PR 300/600 PLUS, BBP72
up to 4.7 / 120
up to 3.9 / 100
up to 1.4 / 36
Introduction
Technical Data
3 Edition 04/10