Introduction
Safety Instructions
1-2 Safety Instructions
CAUTION!
Rotating knife. Do not touch or put fingers near knife.
2 Edition 04/10
•
Disconnect the printer from the electrical outlet before mounting or removing
the cutter.
•
The cutter may only be operated when it is mounted on the printer.
•
Risk of injury, particularly during maintenance, the cutter blades are sharp.
•
Only trained personnel or service technicians should perform maintenance.
•
Unauthorized interference with electronic modules or their software can cause
malfunctions. Other unauthorized work or modifications to the device can also
endanger operational safety.
•
Always have service work done in a qualified workshop, where the personnel
have the technical knowledge and tools required to do the necessary work.
•
Do not remove warning stickers, as then you and other people cannot be aware
of dangers and may be injured.
A
C
O
'
M
UTO
UTTER
PERATOR
S
ANUAL