6-3-Setting Initial State Of The Cutter - Brady BP-PR PLUS Series Operator's Manual

6-3 Setting Initial State of the Cutter
To operate the cutter correctly after cleaning or after changing the blades the
circular blade [4] and the clock wheel [11] must be adjusted to each other.
1. Unscrew the screws [1], [3] and [6, at the rear].
2. Remove the cover [2].
3. Turn the axle [5] of the circular blade with a screwdriver for slotted head
A C O ' M
UTO UTTER PERATOR S
1
screws (slot width 7 mm) so that the planar area [8] of the blade axle becomes
parallel to the base plate [7].
7
ANUAL
2 3 4
8
Maintenance
Setting Initial State of the Cutter
5
6
6
15 Edition 04/10