7-4-Circuit Diagram Of Outputs - Brady BP-PR PLUS Series Operator's Manual

Peripheral Interface
Circuit Diagram of Outputs
7-4 Circuit Diagram of Outputs
All outputs are established through solid-state relays. The outputs are connected
to one another on one-side. The common line leads to the plug connector as a
RUEL signal.
The switch function of the outputs is to open or close the contact between the joint
line RUEL and the respective output.
Electrical requirements : U = 42 V , I = 100 mA
max max
A C O ' M 21 Edition 04/10
UTO UTTER PERATOR S ANUAL