Brady BP-PR PLUS Series Operator's Manual page 11

1. For setting the cutter parameters select:
Notes:
• The values of the setup are basic settings for the actual combination printer/
• Changes required for processing different print jobs should be implemented in
• The offset values from setup and software are added together for execution.
A C O ' M
UTO UTTER PERATOR S
> Machine param.
Setup
Parameter
Cutter Configuration of the cutter
> Cut Offset of the cut position relative to the printed
position image.
Cut position with the initial offset value of "0"
causes to cut in the middle of the gap between two
labels.
If the cut position value is positive, the media will
be advanced before it is cut, that means the
distance between the cut edge and the rear edge
of the label increases.
cutter. After changing the cutter or printer, a re-adjustment may be necessary.
additional offsets available in the software.
ANUAL
Printer Configuration
> Cutter .
Meaning
Mounting the Cutter
Default
0
7 Edition 04/10