Answering Calls; Missed Call Notification - Sanyo Juno User Manual

Answering Calls

1.
Make sure your phone is on. (If your phone is off, incoming
calls go to voicemail.)
2. Press to answer an incoming call. (Depending on your
settings, you may also answer incoming calls by pressing
other keys. See "Call Answer Mode" on page 36.)
Your phone notifies you of incoming calls in the following ways:
The phone rings or vibrates.
The backlight illuminates.
The screen displays an incoming call message.
If the incoming call is from a number stored in your Contacts, the
entry's name is displayed. The caller's phone number may also be
displayed, if available.
When receiving a call, press one of the following keys for other
actions:
to answer a call in speaker mode.
IGNORE WITH TEXT (right softkey) to ignore the call and send
a text message to the caller.
Note
may not be displayed when calls are from
IGNORE WITH TEXT
entries identified as
No Caller ID
to ignore a call.
, , or .
Private Unavailable ID
SILENCE (left softkey) to mute the ringtone and vibration.
Tip Pressing the key or any of the side buttons can also mute
BACK
the ringtone and vibration.
Note When your phone is off, all calls go directly to voicemail.
Ending a Call
Press .

Missed Call Notification

When an incoming call is not answered, your screen displays the
Missed Call log. Press to dial the phone number.
When there are two or more missed notifications, a Missed Alerts
list is displayed. Highlight the entry and press
To dial the phone number, press
The keyboard will continue to flash up to 24 hours unless you
respond to the notifications, such as an incoming call, message
notifications, or alarm clock.
To display a Missed Alerts entry from standby mode:
1.
Press > Missed Alerts .
2.
Highlight the entry you wish to view and press
to see details.
.
.
2A. Phone Basics 15