Adjusting Volume Settings; Setting Up Voice Guide - Sanyo Juno User Manual

2.
Highlight an option and press
Tone Length to select a key tone length. (Longer tone
lengths may be better for tone recognition when dialing
voicemail or other automated systems.)
Tone Volume to select a keypress volume level.
Tone Type to select the sound of a keypress.
3.
Highlight a setting and press
Note Tone Length setting is enabled only when Type 1 is selected in
Tone Type.

Setting Up Voice Guide

Voice Guide allows you to hear voice prompts and spoken
numbers or key names as you press the key. (The default setting
is Off . )
1.
Press > Settings/Tools > Settings > Sounds > Voice Guide .
2.
Select On or Off .
Note When the ringtone volume is set to
Voice Guide does not work.
28 2B. Settings
.
.
or ,
Silence All Vibrate All

Adjusting Volume Settings

Adjust your phone's volume settings to suit your needs and your
environment.
1.
Press > Settings/Tools > Settings > Sounds > Volume .
2.
Select Ringtone , Earpiece , Headset , Speakerphone ,
Applications , or Start Up/Power Off .
3. Press the navigation key left or right to choose a volume
level and press DONE (left softkey).
Tip You can adjust the ringtone volume in standby mode (or the
earpiece volume during a call) by using the volume button on the
left side of your phone.
You can make your phone vibrate at any volume level by
checking
Always Vibrate
You can set the alert volume separately from the ringtone volume
setting.
1. Press > Settings/Tools > Settings > Sounds > Volume >
Advanced...
2.
Select Alarms , Text Message , Media Mail , Voicemail , or Email .
3.
Select Separate Volume .
4.
Select a volume level, and press DONE (left softkey).
.