Making And Answering Calls; Making Calls; Answering Calls - Sanyo SCP-8200 Operating Manual

Making and Answering Making Making Making and Answering and Answering and Answering Calls

Making Calls

Making Calls Making Calls Making Calls
1. Make sure your phone is On.
2. Enter a phone number. (If you make a mistake while dialing, press Back to erase one digit
at a time. Press and hold Back to erase the entire number.)
3. Press TALK or SPEAKER . (To make a call when you are roaming and Call Guard is
enabled, press MENU/OK, highlight Roam Call
4. When you're finished, press END/ to end the call.
Tip: To redial your last outgoing call, press TALK or SPEAKER twice. Tip:
Tip: Tip:

Answering Calls

Answering Calls Answering Calls Answering Calls
1. Make sure your phone is On. If your phone is Off, incoming calls go to voicemail.
2. When your phone rings, press TALK or SPEAKER.
Depending on your settings, your PCS Phone notifies you of incoming calls in the following
ways:
The phone rings and/or vibrates.
The LED flashes.
The backlight illuminates.
The screen displays an incoming call message.
If available, the phone number of the caller is displayed.
If the phone number is in your Contacts list, the Contacts entry's name is displayed.
The picture is displayed when you have set the downloaded picture to "Incoming Calls".
The following options are also displayed by pressing MENU/OK. To select an option,
highlight it and press MENU/OK.
Call Guard to answer the call when you are in roaming. (This feature appears when you Call Guard Call Guard Call Guard
are in digital area and analog service area.) See "Call Guard" on page 36.
Answer Answer Answer Answer to answer the call.
Answer:Speaker to answer the call in speakerphone mode. Answer:Speaker
Answer:Speaker Answer:Speaker
Don' ' ' ' t Answer Don t Answer to hang up the incoming call and return to Web while you are in the Web
Don Don t Answer t Answer
operation. (This feature appears when PCS Vision access is dormant.)
Screen Call Screen Call Screen Call to answer the call by using pre-recorded announcement. (This feature appears Screen Call
when you are in Service area or digital roaming area.) See page 58 for setting up.
Quiet Ringer Quiet Ringer to mute the ringer. (This feature appears when the ringer is set.)
Quiet Ringer Quiet Ringer
Exit to exit the options. Exit Exit Exit
To answer a call when you are roaming and Call Guard is enabled, you must press MENU/OK,
select Answer Answer or Answer:Speaker Answer:Speaker and press MENU/OK to answer the call. See "Call Guard" on
Answer Answer Answer:Speaker Answer:Speaker
page 36.
Note: If your phone is Off. Incoming calls go to voicemail. Note:
Note: Note:
3. To disconnect the call, press END/ .
Calls Calls Calls
Roam Call or Roam:Speaker
Roam Call Roam Call
12
Roam:Speaker and press MENU/OK .)
Roam:Speaker Roam:Speaker