Table of Contents
Advertisement
Making and Answering Calls
Holding Your Phone
To maximise performance, do not obstruct the bottom portion of
your phone where the internal antenna is located while using the
phone.
Making Calls
To place a call using your keypad:
1.
Make sure your phone is on.
2.
Enter a phone number from standby mode. (If you make a
mistake while dialing, press
Press and hold
3.
Press
4.
Press
feature:" on page 39) when you are finished.
To place a call with the flip closed:
1.
Make sure your phone is on and the Side Key Guard feature is
disabled. (See "Setting the Side Key Guard" on page 40.)
2.
Press and hold
3.
Follow the system prompts. (The call will be made in
speakerphone mode unless you have a headset attached to the
phone.)
Say the name of your registered Voice Dial entry (see the note
below) or press
Note:
To use a Voice Dial, you must have stored Voice Dial entries. (See "Using
Voice-Activated Dialing" on page 76.)
1. The Basics
Correct
Internal Antenna
to erase the entire number.)
or
.
or close the phone (see "To activate the Close Flip
on the left side of the phone.
again to redial.
Incorrect
to erase one digit at a time.
11
Advertisement
Table of Contents
