Call Answer Mode; Headset Options - Sanyo Juno User Manual

Call Answer Mode

Select how to answer incoming calls on your phone whether by
pressing or any key (except softkeys, side buttons,
).
1.
Press > Settings/Tools > Settings > More... > Call Setup >
Call Answer .
2.
Select Talk Key or Any Key .
Auto-Answer Mode
Set your phone to automatically pick up incoming calls.
Remember, your phone will answer calls in auto-answer mode
even if you are not present.
1.
Press > Settings/Tools > Settings > More... > Call Setup >
Auto-Answer .
2.
Highlight an option and press
Hands-free to answer calls automatically when the phone is
connected to an optional headset or hands-free device.
Speakerphone to answer calls automatically in
speakerphone mode.
3.
Highlight the time you would like your phone to wait before
answering and press
36 2B. Settings
.
.

Headset Options

Set up your phone for hands-free use. You can enable the Turbo
, and Button (operation button on your headset) to make, receive, or
end a call, or to activate ASR (see page 57). You can also select
the ringtone mode.
To enable the Turbo Button:
> Settings/Tools > Settings > More... > 
1. Press
Headset Mode > Turbo Button .
2.
Select On .
Press the turbo button to stop the alarm and/or display the
details of message notifications.
(To disable the Turbo Button, follow steps 1 and 2 and
select Off . )
To select the ringtone mode:
> Settings/Tools > Settings > More... > 
1.
Press
Headset Mode > Ringtone Sound .
2.
Select Normal or Headset Only .