Making And Answering Calls - Sanyo RL-4930 Manual

Making and Answering Calls

Making Calls
Placing a call from your Sprint PCS Phone is as easy as making
a call from any land line phone. Just enter the number and
T
press
To place a call using your keypad:
1.
Make sure your phone is on.
2.
Enter a phone number from standby mode. (If you make
a mistake while dialing, press
time. Press and hold
3.
Press
roaming and Call Guard is enabled, see "Using Call
Guard"on page 108.)
4.
When you're finished, press
Tip:
To redial the last outgoing call, press
Tip:
When making calls off of the nationwide Sprint PCS network, always
dial using 11 digits (1 + area code + phone number).
You can also place calls from your Sprint PCS Phone by using
Sprint PCS Voice Command
42), your Call History listings (page 120), Automatic Speech
Recognition (page 160), and your Contacts directory (page 41).
Important:
To maximize performance
when using your Sprint PCS Phone, extend
the antenna before a call and do not touch
the antenna during a call.
26
S
or , and you're on your way to clear calls.
T S
or
Section 2A: Your Sprint PCS Phone – The Basics
B
to erase one digit at a
B
to erase the entire number.)
. (To place a call when you are
E
to end the call.
T S
or
SM
(page 264), Speed Dialing (page
Correct
twice.
Incorrect