Editing A Contacts Entry; Assigning Speed Dial Numbers; Selecting A Ringtone Type For An Entry - Sanyo Juno User Manual

Editing a Contacts Entry

1.
From standby mode, press CONTACTS (right softkey).
2.
Highlight the Contacts entry you want to edit and press
OPTIONS (right softkey) > Edit Contact .
3.
Select the field you wish to edit, and then add or edit the
information and press
4.
Press DONE (left softkey).

Assigning Speed Dial Numbers

Your phone can store up to 98 phone numbers in speed dial
locations. (See "Speed Dialing" on page 19.)
To assign a speed dial number to a new phone number:
1.
Add a phone number to a new or to an existing Contacts
entry. (See "Adding a New Contacts Entry" on page 45.)
2.
Highlight the phone number and press OPTIONS (right
softkey) > Set Speed Dial .
3.
Highlight an available speed dial location and press
4.
Press to return to the Contacts menu.
48 2D. Contacts
.
To assign a speed dial number to an existing phone number:
1. From standby mode, press CONTACTS (right softkey).
2.
Highlight a Contacts entry and press
Highlight a number and press OPTIONS (right softkey) > 
3.
Set Speed Dial .
4. Highlight an available speed dial location and press
Tip To replace a current assignment, select a location and press
REPLACE
To check speed dial assignments:
From standby mode, press CONTACTS (right softkey) >
OPTIONS (right softkey) > Settings > Speed Numbers.

Selecting a Ringtone Type for an Entry

Assign a ringtone type to a Contacts entry so that you can identify
the caller by the ringtone type. (See "Ringtone Types" on
page 26.)
1.
From standby mode, press CONTACTS (right softkey).
.
2.
Highlight a Contacts entry and press
.
T
(left softkey).
.
.