Turning Your Phone On And Off - Sanyo Juno User Manual

Voice Call Icons
Missed Call – You have missed voice calls.
Bluetooth Device – A call is in progress using a Bluetooth
device.
Headset – A call is in progress using an optional wired
headset.
Car Kit – A call is in progress using an optional car kit
device.
TTY – Your phone is connected to a TTY device.
Alarm Clock – Alarm clock or countdown is set.
Notification – You have events, call reminders, alarm
clock, or countdown notifications.
HAC Enabled – Your phone's HAC setting is enabled.
10 2A. Phone Basics
Others

Turning Your Phone On and Off

Turning Your Phone On
Press and hold .
Once your phone is on and finds a signal, it automatically enters
standby mode – the phone's idle state. At this point, you are
ready to begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically activated. When
a signal is found, your phone automatically returns to standby
mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also initiate a
search for service by pressing any key except numbered keys.
Tip
The Power Save feature conserves your battery power when you
are in an area where there is no signal.
Turning Your Phone Off
Press and hold for two seconds until you see the
powering-down animation on the display screen.
Your screen remains blank while your phone is off unless the
battery is charging.