Chapter 4 Connecting A Cisco Nexus 2000 Series Fabric Extender - Cisco SD2008T-NA Installation Manual

Connecting a Cisco Nexus 2000 Series Fabric
Extender
This chapter describes how to connect the ports on a Cisco Nexus 2000 Series Fabric Extender (FEX).
Caution When running power and data cables in overhead or subfloor cable trays, we strongly recommend that
you have power cables and other potential noise sources as far away as practical from network cabling
that terminates on Cisco equipment. In situations where long parallel cable runs cannot be separated by
at least 3.3 feet (1 m), we recommend that you shield any potential noise sources by housing them in a
grounded metallic conduit.
This chapter includes the following sections:
Preparing for Network Connections, page 4-2
•
Connecting to the 1-Gigabit Ethernet Port, page 4-2
•
Connecting to a 10-Gigabit Ethernet Port, page 4-2
•
OL-19013-05
C H A P T E R
Cisco Nexus 2000 Series Hardware Installation Guide
4
4-1