Fan Tray For The Cisco Nexus 2224Tp Fex; Transceivers And Connectors Supported By The Cisco Nexus 2224Tp Fex - Cisco SD2008T-NA Installation Manual

Cisco Nexus 2224TP FEX
S e n d d o c u m e n t a t i o n c o m m e n t s t o n e x u s 5 k d o c s @ c i s c o . c o m
•
•
For information on these power supplies, see the
section on page 2-13
page
section on page

Fan Tray for the Cisco Nexus 2224TP FEX

The Cisco Nexus 2224TP, 2248TP, and 2248TP-E FEXs use the same fan tray that you can order with
either front-to-back airflow (N2K-C2248-FAN) or back-to-front airflow (N2K-C2248-FAN-B).
For information on this fan tray, see the
page 2-14
the "Physical Specifications" section on page
replace one of these fan trays, see the

Transceivers and Connectors Supported by the Cisco Nexus 2224TP FEX

The Cisco Nexus 2224TP FEX supports SFP+ Ethernet optical and copper transceivers and optical FEX
Transceivers (FETs) for up to four fabric uplink connections to Cisco Nexus 7000 Series switches, and
it supports RJ-45 connectors for up to 48 downlink connections to hosts. For each uplink cable, you must
use the same transceiver on both ends.
uplink fabric .
Table 2-10 Supported Transceivers and Connector for the Cisco Nexus 2224TP FEX Uplink Interfaces
Transceiver or
Connector
FET-10G
SFP-10G-LR
SFP-10G-SR
SFP -H10GB-CU1M
SFP -H10GB-CU3M
SFP -H10GB-CU5M
SFP -H10GB-ACU7M
SFP -H10GB-ACU10M
RJ-45
Figure 2-10 on page 2-10
specifications that apply to these optical transceivers, see the
section on page
Cisco Nexus 2000 Series Hardware Installation Guide
2-28
DC power supply with front-to-back airflow (N2200-PDC-400W)
DC power supply with back-to-front airflow (N2200-PDC-350W-B)
and the power supply specifications in the
B-1. To replace one of these power supplies, see the
3-17.
and the fan tray specifications in the
Fabric Host
Cable Interface Interface
Type (Uplink) (Downlink) Comments
Optical X –
Optical X –
Optical X –
Copper X –
Copper X –
Copper X –
Copper X –
Copper X –
Copper – X
shows the SFP+ optical transceiver used for uplink connections. For
B-6.
Chapter 2 Using a Fabric Extender with a Cisco Nexus 7000 Series Switch
"Power Supplies for the Cisco Nexus 2248TP FEX"
"Removing and Installing Power Supplies"
"Fan Tray for the Cisco Nexus 2248TP FEX" section on
"Environmental Specifications" section on page B-4
B-5. For LED descriptions, see
"Removing and Installing the Fan Tray" section on page
Table 2-2 lists the transceivers supported by this FEX for its
10 Gbps FEX transceiver
10 Gbps long range transceiver (up to 6.2 miles [10 km])
10 Gbps Short range transceiver (up to 984 feet [300 m])
10 Gbps Twinax, passive transceiver (3.3 feet [1 meter])
10 Gbps Twinax, passive transceiver (9.8 feet [3 meters)
10 Gbps Twinax, passive transceiver (16.4 feet [5 meters])
10 Gbps Twinax, active transceiver (23.0 feet [7 meters])
10 Gbps Twinax, active transceiver (32.8 feet [10 meters])
100/1000 Mbps Connector
"SFP+ Optical Transceiver Specifications"
"Power Specifications" section on
Table D-1 on page
and
D-2. To
3-20.
OL-19013-05