Supported Transceivers And Cables; Sfp Transceivers - Cisco SD2008T-NA Installation Manual

Chapter 1 Using a Fabric Extender with a Cisco Nexus 5000 Series Switch
1
2
To replace a fan tray, see the
descriptions, see

Supported Transceivers and Cables

The Cisco Nexus 2248TP-E FEX supports SFP+ Ethernet transceivers. This section includes the
following topics:
•
•

SFP Transceivers

The enhanced Small-Form-Factor Pluggable (SFP+) 10-Gigabit Ethernet transceiver is a bidirectional
device with a transmitter and receiver. It has a 20-pin connector on the electrical interface and duplex
LC connector on the optical interface. Currently, the Cisco Nexus 2248TP-E FEX supports the
short-range SFP and long-range SFP transceiver.
the Cisco Nexus 2248TP-E FEX.
Table 1-3
Model
N2200 FET
SFP-10-Gigabit -SR
SFP-10-Gigabit -LR
SFP+ Copper Cables
Copper interface cables are available for use with the 10-Gigabit Ethernet SFP+ transceiver.
lists the available cables and provides a brief description of the cables.
Table 1-4
Model
SFP-H10GB-CU1M
SFP-H10GB-CU3M
SFP-H10GB-CU5M
OL-19013-05
Captive screws (2)
Black stripe indicates back-to-front airflow
"Removing and Installing the Fan Tray" section on page
Table D-1 on page
SFP Transceivers, page 1-16
SFP+ Copper Cables, page 1-17
SFP Transceivers for the Cisco Nexus 2248TP-E FEX
Description
10-Gigabit Ethernet for connections with a Cisco Nexus 5000 Series switch
10-Gigabit Ethernet—short range SFP+ module
10-Gigabit Ethernet—long range SFP+ module
Copper Cables for the Cisco Nexus 2248TP-E FEX
3
Status LED
D-2.
Table 1-3 describes the SFP+ transceivers used with
Description
10-Gigabit BASE-CU SFP+ Passive Cable
(1 meter)
10-Gigabit BASE-CU SFP+ Passive Cable
(3 meters)
10-Gigabit BASE-CU SFP+ Passive Cable
(5 meters)
Cisco Nexus 2000 Series Hardware Installation Guide
Cisco Nexus 2248TP-E
3-20. For LED
Table 1-4
1-9