Chassis; Ports; Power Supplies - Cisco SD2008T-NA Installation Manual

Chapter 1 Using a Fabric Extender with a Cisco Nexus 5000 Series Switch
Figure 1-24
1
1
2

Ports

The Cisco Nexus 2232PP FEX supports a total of 32 10-Gigabit Ethernet/Fibre Channel over Ethernet
(FCoE) ports (SFP+) and 8 10-Gigabit Ethernet/FCoE uplinks (SFP+). SFP transceivers can also be
plugged into the SFP+ cages to allow a 1G downlink. The Cisco Nexus 2232PP provides two types of
ports: ports for end-host attachments and uplink ports. Uplink ports are differentiated with yellow for
connectivity to the upstream parent Cisco Nexus 5000 Series switch.
The Cisco Nexus 2232PP 10-Gigabit Ethernet FEX allows for migration from Gigabit Ethernet to
10-Gigabit Ethernet and unified fabric environments. It supports Data Center Bridging (DCB) which
increases the reliability, efficiency, and scalability of Ethernet networks by allowing the switches to
support multiple traffic classes over a lossless Ethernet fabric, enabling consolidation of LAN, SAN, and
cluster environments.

Power Supplies

The Cisco Nexus 2232PP FEX chassis has two bays for front-end AC or DC power supplies. This chassis
is fully functional with one power supply, but you can install a second power supply for power
redundancy. The power supply is hot swappable during operations.
Table 1-13
Table 1-13
Power Supply
AC power supply with front-to-back airflow
AC power supply with back-to-front airflow
OL-19013-05
Rear View of the Cisco Nexus 2232PP Chassis
2
3
Status and ID LEDs
HDMI port
lists the power supplies that you can order with the Cisco Nexus 2232PP FEX.
Power Supplies for the Cisco Nexus 2200 Platform Chassis
4
3
10-Gigabit Ethernet/FCoE Data ports (32)
4
10-Gigabit Ethernet/FCoE uplink ports (8)
Part Number
N2200-PAC-400W
N2200-PAC-400W-B
Cisco Nexus 2000 Series Hardware Installation Guide
Cisco Nexus 2232PP
1-25