Cisco Nexus 2248Tp-E Fex - Cisco SD2008T-NA Installation Manual

Cisco Nexus 2248TP-E FEX

S e n d d o c u m e n t a t i o n c o m m e n t s t o n e x u s 5 k d o c s @ c i s c o . c o m
Cisco Nexus 2248TP-E FEX
The Cisco Nexus 2248TP-E FEX (N2K-C2248TP-E) is a stackable 1-RU FEX that has 48 100/1000
Ethernet host-facing (downlink) ports and four 10-Gigabit Ethernet network-facing (uplink) ports. It
requires a 19-inch (48.26 cm) rack for its installation.
Table 2-1
Dimensions
Weight
1. Measured with two power supplies and one fan module installed.
You can order the Cisco Nexus 2248TP-E with front-to-back (port-side exhaust) or back-to-front
(port-side intake) airflow and with AC or DC power supplies. If you are going to install the port side in
a hot aisle, then order front-to-back airflow for the fan trays and power supplies. If you are going to
install the port side in the cold aisle, order back-to-front airflow for the fan trays and power supplies.
For visual identification, back-to-front airflow power supplies and fan trays have a black stripe across
Note
their front, and front-to-back airflow modules do not have a black stripe across their front. All of the
power supplies and fan trays must have the same direction of airflow for the components to properly
function (all of these components must either have a black stripe or all of the components must not have
a black stripe).
The front of the Cisco Nexus 2248TP-E FEX chassis has one or two power supplies, a fan tray, and two
chassis LEDs as shown in
redundancy, you must install a second power supply.
Cisco Nexus 2000 Series Hardware Installation Guide
2-2
Physical Characteristics for the Cisco Nexus 2248TP-E FEX
Width
Depth
Height
1
Figure
Chapter 2 Using a Fabric Extender with a Cisco Nexus 7000 Series Switch
Table 2-1
17.3 inches (43.9 cm)
20.0 inches (50.8 cm)
1.72 inches (4.4 cm)
17.7 lb (8.0 kg)
2-1. This FEX model requires one power supply, but if you want power
lists its physical characteristics.
OL-19013-05