Sfp Transceivers; Sfp+ Copper Cables; Fan Tray - Cisco SD2008T-NA Installation Manual

Cisco Nexus 2248TP
Figure 1-17
1
1
2
To replace a fan tray, see the
descriptions, see
Supported Transceivers and Cables
The Cisco Nexus 2248TP FEX supports SFP+ Ethernet transceivers. This section includes the following
topics:
•
•

SFP Transceivers

The enhanced Small-Form-Factor Pluggable (SFP+) 10-Gigabit Ethernet transceiver is a bidirectional
device with a transmitter and receiver. It has a 20-pin connector on the electrical interface and duplex
LC connector on the optical interface. Currently, the Cisco Nexus 2248TP FEX supports the short-range
SFP and long-range SFP transceiver.
Nexus 2248TP FEX.
Table 1-7
Model
N2200 FET
SFP-10-Gigabit -SR
SFP-10-Gigabit -LR
Cisco Nexus 2000 Series Hardware Installation Guide
1-16
Back-to-Front Airflow Fan Tray for the Cisco Nexus 2248TP and 2224TP FEXs
2
3
Captive screws (2)
Black stripe indicates back-to-front airflow
"Removing and Installing the Fan Tray" section on page
Table D-1 on page
SFP Transceivers, page 1-16
SFP+ Copper Cables, page 1-17
SFP Transceivers used with the Cisco Nexus 2248TP FEX
Description
10-Gigabit Ethernet for connections with a Cisco Nexus 5000 Series switch
10-Gigabit Ethernet—short range SFP+ module
10-Gigabit Ethernet—long range SFP+ module
Chapter 1 Using a Fabric Extender with a Cisco Nexus 5000 Series Switch
1
3 Status LED
D-2.
Table 1-7 describes the SFP+ transceivers used with the Cisco
3-20. For LED
OL-19013-05