Cisco Nexus 2232Pp Fex - Cisco SD2008T-NA Installation Manual

Hardware installation guide
Hide thumbs Also See for SD2008T-NA:
Table of Contents

Advertisement

Cisco Nexus 2232PP FEX

S e n d d o c u m e n t a t i o n c o m m e n t s t o n e x u s 5 k d o c s @ c i s c o . c o m
Table 2-6
Supported Transceivers and Connector for the Cisco Nexus 2232TM FEX Uplink Interfaces
Transceiver or
Connector
FET-10G
SFP-10G-LR
SFP-10G-SR
1
SFP -H10GB-CU1M
SFP -H10GB-CU3M
SFP -H10GB-CU5M
SFP -H10GB-ACU7M
SFP -H10GB-ACU10M
RJ-45
1. The SFP-H10GB-CUxM transceivers are not supported by the M1 Series 32-port 10-Gigabit Ethernet I/O module (N7K-M132XP-12). These transceivers
are supported by the other Cisco Nexus 7000 Series I/O modules.
Figure 2-10 on page 2-10
connections. For specifications that apply to these optical transceivers, see the
Transceiver Specifications" section on page
Figure 2-11 on page 2-10
uplink connections. For the cable specifications that apply to these transceivers, see the
Transceiver Specifications" section on page
Figure 2-12 on page 2-11
connections.
Cisco Nexus 2232PP FEX
The Cisco Nexus 2232PP FEX is a stackable 1- and 10-Gigabit FEX that has 32 1- and 10-Gbps Ethernet
host-facing (downlink) SFP or SFP+ ports and eight 10-Gbps Ethernet and Fibre Channel over Ethernet
(FCoE) network-facing (uplink) SFP+ or FET ports. It requires a 19-inch (48.26 cm) rack for its
installation.
Table 2-7
Dimensions
Weight
1. Measured with two power supplies and one fan module installed
Cisco Nexus 2000 Series Hardware Installation Guide
2-20
Fabric
Host
Cable
Interface
Interface
Type
(Uplink)
(Downlink) Comments
Optical
X
Optical
X
Optical
X
Copper
X
Copper
X
Copper
X
Copper
X
Copper
X
Copper
X
shows the major features of the SFP+ optical transceiver used for uplink
shows the major features of the SFP+ copper transceiver and cable used for
shows the major features of RJ-45 connectors, which are used for the downlink
Table 2-7
lists its physical characteristics.
Physical Characteristics for the Cisco Nexus 2232PP FEX
Width
Depth
Height
1
Chapter 2
Using a Fabric Extender with a Cisco Nexus 7000 Series Switch
10 Gbps FEX transceiver
10 Gbps long range transceiver (up to 6.2 miles [10 km])
10 Gbps Short range transceiver (up to 984 feet [300 m])
10 Gbps Twinax, passive transceiver (3.3 feet [1 meter])
10 Gbps Twinax, passive transceiver (9.8 feet [3 meters)
10 Gbps Twinax, passive transceiver (16.4 feet [5 meters])
10 Gbps Twinax, active transceiver (23.0 feet [7 meters])
10 Gbps Twinax, active transceiver (32.8 feet [10 meters])
100/1000 Mbps Connector
B-6.
B-7.
17.3 inches (43.94 cm)
17.7 inches (44.96 cm)
1.72 inches (4.37 cm)
18.3 lb (8.3 kg)
"SFP+ Optical
"SFP+ Copper
OL-19013-05

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Sfe2000pSlm2024t-naSr2016t-naNexus 2000 series

Table of Contents