Cisco SD2008T-NA Installation Manual page 87

Installing a Cisco Nexus 2000 Series Fabric
Extender
This chapter describes how to install the Cisco Nexus 2000 Series Fabric Extenders (FEXs) and includes
the following sections:
• Preparing for Installation, page 3-2
Installing the Cisco Nexus 2000 Series Fabric Extender Chassis in a Cabinet or Rack, page 3-5
•
Grounding the System, page 3-9
•
Grounding the Chassis, page 3-14
•
Starting the Cisco Nexus 2000 Series Fabric Extender, page 3-15
•
Removing and Installing Components, page 3-17
•
Repacking the Cisco Nexus 2000 Series Fabric Extender for Return Shipment, page 3-22
•
Note Before you install, operate, or service the system, read the Regulatory Compliance and Safety
Information for the Cisco Nexus 5000 Series Switches and Cisco Nexus 2000 Series Fabric Extenders
for important safety information.
IMPORTANT SAFETY INSTRUCTIONS
Warning
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
This unit is intended for installation in restricted access areas. A restricted access area can be
Warning
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Warning Only trained and qualified personnel must be allowed to install, replace, or service this equipment.
Statement 1030
OL-19013-05
C H A P T E R
Cisco Nexus 2000 Series Hardware Installation Guide
3
3-1