Managing The Switch - Cisco IE-3000-8TC Getting Started Manual

Cisco IE 3000 Switch Getting Started Guide
Refreshing the PC IP Address

Managing the Switch

Using the Device Manager
OL-16234-01
After you complete Express Setup, you should refresh the PC IP address:
For a dynamically assigned IP address, disconnect the PC from the switch,
•
and reconnect the PC to the network. The network DHCP server assigns a new
IP address to the PC.
For a statically assigned IP address, change it to the previously configured
•
IP address.
After you complete Express Setup and install the switch in your network, use the
device manager or other management options described in these sections for
additional configuration:
Using the Device Manager, page 9
•
Downloading Cisco Network Assistant, page 10
•
Command-Line Interface, page 10
•
Other Management Options, page 11
•
The simplest way to manage the switch is by using the device manager that is in
the Cisco IOS image. The device manager has a web interface that simplifies
configuration and monitoring of the switch. You can access the device manager
from anywhere in your network through a web browser.
Follow these steps:
Launch a web browser on your PC or workstation.
1.
Enter the switch IP address in the web browser, and press Enter. The device
2.
manager page appears.
Cisco IE 3000 Switch Getting Started Guide
9