Configure Basic Wireless Quality Of Service - NETGEAR WNDAP360 Reference

Table 15. Wireless Radio On/Off Settings (Continued)
Field
Radio ON Time
Radio OFF Time
3. Click Apply to save your settings.

Configure Basic Wireless Quality of Service

Wi-Fi Multimedia (WMM) is a subset of the 802.11e standard. WMM allows wireless traffic to
have a range of priorities, depending on the type of data. Time-dependent information, such
as video or audio, has a higher priority than normal traffic. For WMM to function correctly,
wireless clients also need to support WMM.
By enabling WMM, you allow Quality of Service (QoS) control for upstream traffic flowing
from a wireless station to the wireless access point and for downstream traffic flowing from
the wireless access point to a wireless station.
WMM defines the following four queues in decreasing order of priority:
• Voice. The highest priority queue with minimum delay, which makes it ideal for
applications like VoIP and streaming media.
• Video. The second highest priority queue with low delay is given to this queue. Video
applications are routed to this queue.
• Best Effort. The medium priority queue with medium delay is given to this queue. Most
standard IP application use this queue.
• Background. Low priority queue with high throughput. Applications, such as FTP, that
are not time-sensitive but require high throughput can use this queue.
The WMM Powersave feature saves power for battery-powered equipment by increasing the
efficiency and flexibility of data transmission.
Note: For information about how to configure advanced wireless QoS, that
is, to configure specific Enhanced Distributed Channel Access
(EDCA) settings, see
page 86.
ProSafe Dual Band Wireless-N Access Point WNDAP360
Description
Fill in the time that you want the radio to be turned back on. Use 24-hour time
format.
Fill in the time that you want the radio to be turned off. Use 24-hour time format.
Configure Advanced QoS Settings
Wireless Configuration and Security
56
on