NETGEAR WNDAP360 Reference page 100

ProSafe Dual Band Wireless-N Access Point WNDAP360
Figure 61.
f. Specify the settings as explained in the following table:
Table 28. Wireless Signal Repeating Profile and Authentication Settings
Field
Profile Definition
Profile Name
Remote MAC Address
Authentication Settings
Network Authentication
and
Data Encryption
Description
Enter a profile name that is easy to remember. The default names for the four
security profiles are NETGEAR-WDS-1, NETGEAR-WDS-2,
NETGEAR-WDS-3, and NETGEAR-WDS-4.
Enter the MAC address of the remote wireless access point (the MAC
address of AP1 or AP3 in Figure 59
From the Network Authentication drop-down list, select Open System,
WPA-PSK, or WPA2-PSK. Your selection determines the options that the
Data Encryption drop-down list provides, and whether or not the WPA
Passphrase (Network Key) field displays.
Advanced Configuration
100
on page 98).