NETGEAR WNDAP360 Reference page 114

ProSafe Dual Band Wireless-N Access Point WNDAP360
Table 30. Default Configuration Settings WNDAP360 (Continued)
Feature
Wireless Local Network (WLAN)
Operating mode
Wireless access point name
Wireless communication
11 b/g/n wireless network name (SSID)
Broadcast network name SSID
Security
Transmission speed
Country and region
802.11ng radio frequency channel
Output power
Wireless card access list
WMM support
a. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.
Description
Access point, infrastructure mode
netgearxxxxxx where xxxxxx is the last 6 digits of the wireless
access point MAC address.
Enabled
NETGEAR_11ng
Enabled
Disabled (open system)
a
Best
Varies by region
Auto
Full
All wireless stations allowed
Enabled
Supplemental Information
114