NETGEAR WNDAP360 Reference page 116

| | | | |-macacl-add
| | | | |-macacl-database
| | | | |-macacl-del
| | | | |-mcsrate
| | | | |-mode
| | | | |-operation-mode
| | | | |-power
| | | | |-preamble
| | | | |-radio
| | | | |-rate
| | | | |-rifs-transmission
| | | | |
| | | | |-rogue-ap-detection
| | | | |-rts-threshold
| | | | |-security-profile>
| | | | | |-1>
| | | | | | |-authentication
| | | | | | |-encryption
| | | | | | |-hide-network-name
| | | | | | |-key1
| | | | | | |-key2
| | | | | | |-key3
| | | | | | |-key4
| | | | | | |-keyno
| | | | | | |-name
| | | | | | |-presharedkey
| | | | | | |-security-separation
| | | | | | |-ssid
| | | | | | |-status
| | | | | | |-vlan-id
| | | | | | |-wep-pass-phrase
| | | | | | |-wepkeytype
| | | | | |
| | | | | |-2>
| | | | | | |-authentication
| | | | | | |-encryption
| | | | | | |-hide-network-name
| | | | | | |-key1
| | | | | | |-key2
| | | | | | |-key3
| | | | | | |-key4
| | | | | | |-keyno
| | | | | | |-name
| | | | | | |-presharedkey
| | | | | | |-security-separation
| | | | | | |-ssid
ProSafe Dual Band Wireless-N Access Point WNDAP360
--add wireless access control (ACL)
--delete wireless access control (ACL) database
--delete wireless access control (ACL)
--transmit data rate
--enable wireless access control (ACL)
--wireless operation mode
--wireless transmit power
--wireless preamble (only effect on 802.11b rates)
--enable wireless radio
--wireless transmission date rate
--enable successive frame transmission at different
transmit powers
--enable rogue access point detection
--wireless RTS/CTS threshold
--create security profile
--1st security profile
--authentication type
--data encryption
--hide network name
--wireless wep key 1
--wireless wep key 2
--wireless wep key 3
--wireless wep key 4
--key number
--profile name
--pre-shared key
--disable associated wireless client communication
--network name (1-32 chars)
--profile status
--VLAN id
--wireless wep passphrase key
--wireless wep key type
--2nd security profile
--authentication type
--data encryption
--hide network name
--wireless wep key 1
--wireless wep key 2
--wireless wep key 3
--wireless wep key 4
--key number
--profile name
--pre-shared key
--disable associated wireless client communication
--network name (1-32 chars)
Command-Line Reference
116