Table of Contents
Advertisement
Scan a CAD drawing to a USB mass storage device
Feed the original face up and centered on the original feeding table.
1.
Note:
You do not need to center the original precisely. The exact position of the original is au-
tomatically detected by the scanner.
Select 'Scan' on the user panel.
2.
Open the 'Scan' tab with the confirmation button above the scroll wheel.
3.
Use the scroll wheel to select scan template 3 ('CAD to USB').
4.
Scan a CAD drawing to a USB mass storage device
Chapter 3 - Quick start
75
Advertisement
Table of Contents
