The Océ PlotWave 300 hardware
The components of the printer (front)
Illustration
4
3
2
1
Component - function table
#
Nr
Component
1
lower left front cover
2
lower front cover
3
media bypass
4
toner compartment
5
printer top cover
6
top delivery tray
7
USB flash drive interface
5
6
Chapter 2 - Get to know the printing system
The components of the printer (front)
7
Description / Function
Remove this cover if you want to move the
printer.
Door at the front, used for error recovery.
To manually feed cut-sheets up to 36"
width.
Compartment for toner refill.
Only available in printer-only version.
Delivery tray for the printed sheets.
USB connector to use a USB mass storage
device to print from or to scan to, if a
scanner is available.
8
9
10
11
12
23