To Connect The Telephone Handset; To Connect It To The Power Supply; To Add Paper - Olivetti OFX 180 Instructions Manual

Table of Contents

Advertisement

T
O CONNECT THE TELEPHONE HANDSET
1. Insert the connector of the handset cable into the socket marked
with the symbol
on the fax machine.
2. Place the handset in its seat.
T
O CONNECT IT TO THE POWER SUPPLY
n o t E
Before connecting the fax machine to the mains, you
need to remove the band that blocks the print head
carriage by pulling the flap that comes out of the automatic
feeder for original documents.
1. Insert the plug of the power cable into the wall power socket.
The fax machine automatically runs a short test to check that its com-
ponents are working and then the display shows:
N O T E
The fax machine will remain permanently connected,
ready to receive and send documents 24 hours a day.
If you want to turn it off, detach the plug of the power
cable from the wall socket as the fax machine has no on/off
switch.
n o t E
If the messages do not appear in the language spoken in
your country, choose the "LANGUAGE" from those avail-
able by pressing the following keys in the order indicated:
+
The display shows the language in which the
messages will be displayed.
/
To select the desired language.
To confirm the setting.
To complete the procedure.
T
O ADD PAPER
1. Insert the paper support extension in its slit until it clicks into place.
2. Holding the sheets by their upper edge, insert them by letting them
"drop" into the ASF without folding or forcing them.
3. Push the sheets against the left side of the ASF using the adjusting
lever.
n o t E
If you add sheets to the ASF, make sure you place them
under and not on top of those already present.
n o t E
The fax machine has a memory that enables it to receive up
to 21 pages even if you do not add any paper.
T
O CHECK THE PRINT FORMAT SET ON THE FAX MACHINE
Once you have manually adjusted the automatic sheet feeder
(ASF), to ensure that the fax machine works properly,
check that the printing format set on the fax machine
corresponds to the size of paper you intend to use.
Until the display shows:
The display shows:
Until the display shows:
The display shows:
Press |/} until the desired paper format is displayed.
/
To confirm the setting.
The display shows:
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents