Auto Detect Originals - Olivetti d-Copia 2000 Operation Manual

System Setting

Auto Detect Originals

5-18
• Extra Heavy - OHP sheet
• Heavy 3 - from 171 g/m
• Heavy 2 - from 136 g/m
• Heavy 1 - from 106 g/m
• Normal 3 - from 91 g/m
• Normal 2 - from 76 g/m
• Normal 1 - from 60 g/m
• Light (Vellum) - from 60 g/m
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2
Press or to display
30.CustmMedType1.
3
Press [OK].
4 Press or to select the desired media type.
5 Press [OK]. When the optional Duplex Unit is not installed, the display will
return to that of Step 2.
6
Press or and select On when the 2-sided Copying is to be used and
Off when it will not be used.
7
Press [OK]. The display will return to that of Step 2.
Allows you to predetermine what paper size is selected for printing when
copying an original document of non-standard sizes (Refer to below). This
feature is applicable when the size of the original is either Hagaki, A6R,
B4R or Folio. The menu also provides the means to determine whether 11
x 15" is recognized as a standard size.
The setting of Hagaki or A6R is shown here as an example, select
39.B4R/Folio Det and 40.11x15" Detect in the System Menu
before selecting B4R and 11 x 15", respectively.
NOTE:
This setting is only available for metric models.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2
Press or to display 38.Hagaki/
A6RDet.
2 2
to 209 g/m
2 2
to 170 g/m
2 2
to 135 g/m
2 2
to 105 g/m
2 2
to 90 g/m
2 2
to 75 g/m
2 2
to 64 g/m
System Menu:
30.CustmMedType1
System Menu:
38.Hagaki/A6RDet
OPERATION GUIDE