Olivetti d-Copia 2000 Operation Manual page 122

Maintenance
8-8
NOTE:
When pushing back the Electrical Charge Section, do not push it
all the way into the main body. Copying trouble may occur.
After cleaning the Electrical Charge Section using the Grid Cleaner, wait
more than 5 minutes before using the machine.
12 When the Electrical Charge
Section is pulled out
approximately 5 cm (2 inches),
remove the Grid Cleaner and then
push back the Electrical Charge
Section all the way into the main
body.
13
Hold the new toner container
vertically and tap the upper part
five times or more.
Turn the toner container upside
down and tap the upper part five
times or more.
14 Shake the toner container up and
down five times or more.
Turn the toner container upside
down and shake it five times or
more.
15
Hold the toner container
horizontally and shake it from side
to side five times or more.
5 5
OPERATION GUIDE