Text Exposure Adjustment - Olivetti d-Copia 2000 Operation Manual

System Setting

Text Exposure Adjustment

Processing to Reduce Black Line
Photo Processing
5-12
4 Press or and select an exposure from 1 to 7.
5 Press [OK]. The display will return to that of Step 2.
Adjusts the median exposure value of the copy for the Text original.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2 Press or to display 10.Text
Density.
3 Press [OK].
4 Press or and select an exposure from 1 to 7.
5
Press [OK]. The display will return to that of Step 2.
It is possible to make black line less noticeable when it appears when using
the optional Document Processor. Using processing to reduce black line
decreases the reproduction quality of small characters, so it is
recommended that the copier normally be used at the factory default
setting.
NOTE:
When Photo Mode has been selected in Image Quality Mode,
processing to reduce black line is not possible.
1 Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2 Press or to display
11.ReduceStreaks.
3 Press [OK].
4
Press or and select Off, Weak or Strong.
5
Press [OK]. The display will return to that of Step 2.
Select the processing method for photo originals.
System Menu:
10.Text Density
System Menu:
11.ReduceStreaks
OPERATION GUIDE