A Typical Ultralite-Mk3 Hybrid Setup - MOTU UltraLite-mk3 Hybrid User Manual

A TYPICAL ULTRALITE-MK3 HYBRID SETUP

Here is a typical UltraLite-mk3 studio setup. This
rig can be operated without an external mixer. All
mixing and processing can be done in the
computer with audio software. During recording,
you can use the UltraLite-mk3's CueMix™ FX no-
synthesizer
MIDI IN
MIDI OUT
UltraLite-mk3
rear panel
FireWire
or USB2
Mac
I N S T A L L I N G T H E U L T R A L I T E - M K 3 H Y B R I D H A R D W A R E
mic
quarter-inch
Analog outputs (sends, stage
analog outs
monitors, surround monitors, etc.)
S/PDIF
Compressor, reverb or other
analog outboard gear
DAT deck
Figure 3-9: A typical UltraLite-mk3 studio setup.
latency monitoring to listen to what you are
recording via the main outs, headphone outs, or
any other output pair. You can control monitoring
either from the front panel or from the included
CueMix FX software.
headphones
Analog
returns
guitars (with or
without an amp)
monitors
25