MOTU UltraLite-mk3 Hybrid User Manual page 66

Controlling CueMix FX from within AudioDesk
or Digital Performer
To turn on CueMix FX in AudioDesk and Digital
Performer:
1 From the Setup menu, choose Configure Audio
System>Input Monitoring Mode.
2 Choose the Direct hardware playthrough option,
as shown below in Figure 10-7.
Figure 10-7: Enabling CueMix FX in AudioDesk or Digital Performer.
Note: the 'Only during recording...' and 'Always' options are for
AudioDesk and DP only. Later versions of DP have expanded input
monitoring features. Consult your documentation.
66
3 From the Studio menu, choose Audio Patch
Thru, and choose any monitoring mode except Off.
Once enabled, CueMix FX monitoring is tied with
Digital Performer or AudioDesk's Audio Patch
Thru feature: when you record-enable a track, the
track's input is routed directly to its output (via
CueMix FX in the UltraLite-mk3 hardware). For
example, if you record-enable a track called guitar
in your DP or AudioDesk project, and its audio
input assignment is Analog in 2, and its audio
output assignment is channels 7-8, CueMix FX no-
latency hardware monitoring will automatically be
set up from analog in 2 to outputs 7-8.
Controlling CueMix FX from within other
software
Consult the manual for your software.
R E D U C I N G M O N I T O R I N G L A T E N C Y