Table of Contents
Advertisement
How to wash correctly
Programme . . .
. . . interruption
^ Press the "I-ON/0-OFF" button.
^ To continue with the same
programme press the"I-ON/0-OFF"
button again.
. . . alteration
The machine will accept the following
changes after the "Start" button has
been pressed.
– selection of a different temperature,
extra selection or de-selection of the
"Water plus", and "Quick wash" op-
tions can be carried out up to 6 min-
utes after start.
– the spin speed for final spin can be
changed within the limits for the
programme.
After start it is no longer possible to se-
lect a different programme.
If a different programme or 6 minutes
after start another temperature is se-
lected, the indicator light "Anti-
crease/Finish" flashes. This does not af-
fect the programme sequence. The in-
dicator light goes out when the
programme selector is set back to the
programme or temperature previously
chosen.
18
To select a different programme pro-
ceed as follows:
^ With the "I-On/0-Off" button switch off
the appliance.
^ Turn the programme selector to "Fin-
ish".
^ Switch the machine on with the "I-
On/0-Off" button.
^ Select a new programme.
^ Press the "START" button.
. . . Skipping a programme stage
^ Turn the programme selector to "Fin-
ish".
As soon as the programme sequence
light starts flashing for the stage at
which the programme should continue:
^ Turn the programme selector switch
to the appropriate programme within
4 seconds.
When programme locking has been
activated the programme cannot be
changed or a programme stage left
out.
Hide quick links:
Advertisement
Table of Contents
