Table of Contents
Advertisement
6. Start the programme - the end of a programme
Start the programme
Touch the flashing Start/Stop sensor.
The door will lock (the will appear in
the display to show this) and the
programme will start.
If a delay start time has been selected,
then this will count down in the display.
At the end of the delay start time or
immediately after the programme has
started (if no delay start time has been
selected), the programme duration will
appear in the display.
The programme sequence is also
shown in the display. The washing
machine lets you know which section of
the programme has been reached.
At the end of a programme
The door is still locked during the anti-
crease phase and the following will
appear alternately in the display:
Anti-crease/Finish
and
Press Start/Stop
Press the Start/Stop button. This will
unlock the door.
Pull open the door.
Remove the laundry.
Items left in the drum could discolour
other items in the next wash or
become discoloured themselves.
Check that all items have been
removed from the drum.
Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
Tip: Leave the door slightly open to
allow the drum to dry.
Switch the washing machine off with
the button.
If applicable, remove the used
capsule from the detergent
dispensing drawer.
Tip: Leave the detergent dispenser
drawer slightly open to allow it to dry.
27
Advertisement
Table of Contents
