Starting The Calibration Programme - Miele WWG 660 Operating Instructions Manual

5. Starting the calibration pro-
gramme
For optimum water and energy con-
sumption and excellent wash results, it
is important to calibrate the washing
machine.
To do this, the Cottons programme
must be run without laundry and
without detergent.
No other programmes can be started
until calibration has been carried out.
The following message appears in the
display:
Open  and run "Cottons" 90°C without
laundry.
 Touch the  sensor control until the
OK sensor control lights up and con-
firm with OK.
 
90° 1400
 
 Open the stopcock.
 Touch the Start/Add laundry sensor
control.
The calibration programme then starts.
It will take approximately 2 hours.
At the end of the programme, the fol-
lowing message will appear in the dis-
play:

Set up complete
Before using for the first time
 Take hold of the door and pull it
Tip: Leave the door slightly open to al-
low the drum to dry.
 Turn the programme selector to the
1:55
OK
open.
 position.
23