Table of Contents
Advertisement
Programming and storing in
memory
The programmable functions are acti-
vated using the additional option but-
tons and the programme selector in
special combinations, which intro-
duce extra features not marked up on
the control panel.
Programming is carried out in four
steps:
1. Select programming mode
2. Select programmable function
3. Activate or deactivate programmable
function
4. Store the programmable function in
memory
1. Selecting programming mode
A The machine must be switched off
and the drum door closed. The
programme selector must point to
"Finish".
B Press the additional option buttons
"Soak" and "Pre-wash" at the same
time and hold pressed in and:. . .
C . . . switch the machine on with the "I-
ON/0-OFF"-button.
D Release all these buttons.
P 0 appears in the "time" display.
Programmable functions
2. Selecting a programmable function
E For the programmable function re-
quired turn the programme selector
to the setting given:
– for P1 High Water level
to - MIXED WASH Poly/Cottons -
– for P2 Water plus system
to - Separate rinse -
– for P4 activate i compartment
to - Spin -
– for P9 Gentle action
to - WOOLLENS 40°C -
– for P10 Activate top-up rinse for
COTTONS wash
to - DELICATES cold -
– for P11 Memory Function
to - DELICATES 30°C -
F In the Display the P now flashes al-
ternating with the number of the pro-
grammable function
e.g. P...1...P...1
The following also appears on the right:
0 = Programmable function is
not active
1 = Programmable function
is active
with P 2, a 2 appears on the right = Op-
tion 2 is active.
35
Hide quick links:
Advertisement
Table of Contents
